Vagtacho USB V5.0 Professional ECU Chip Tuning Tool Vag Tacho 5.0 USB VAGtacho 5.0
VAG Tacho USB Version V 5.0: 1. Lastest version 5.0, support VDO with 24C32 or 24C64,our vagtacho usb version 5.0 includes the functions of vagtacho usb 4.52 vagtacho usb 4.0, and vagtacho usb 3.5. 2. VAG Kombiinstrument / Immo box eeprom programmer. 3. Windows 7, Vista, Win XP, Win 98 compatible software. 4. Support for some VDO dashes for VW from year 2009-2011 with NEC mcu and 24C32 or 24C64 eeprom memory. 5. Important: These dashes requires ignition to be switched on with valid key of the car. Software version 5.0 works ONLY with interfaces which has got built-in programmer for Megamos ID48 transponders. 6. Built-in programmer for Megamos ID48 transponders. Pre-programming of TP2x transponders as dealer's keys with component security data which is read from immobiliser. 7. NEW key programming feature for VAG cars with VDO dashes on CAN bus.(TP2 and UDS protocols) Note: TP22,23,24,25 transponders are required. Vag tacho usb version 4.52: Vagtcho 4.52 is upgraded from vag tacho usb4.0, Upgrade Vagtacho usb 4.0 interface with Programmer for Megamos ID48 chips, our vagtacho version 5.0 has upgraded directly ,includes the functions for vagtacho usb 4.52. The benefits with this upgrade are: Your Vagtacho interface will works with software vesrion 5.0 for the new VDO dashes with UDS protocol from year 2009+. Programming of new keys to VAG cars which are into FAZIT database. Works with cars which has got locked key programming channel, or pin code is not accepted. No need to wait up to 30 minutes for the key programming procedure. With this upgrade, Vag tacho can program the new key in one minute. Vagtacho version 4.0: VAG Kombiinstrument / Immo box eeprom programmer. Windows 7, Vista, Win XP, Win 98 compatible software Works on any computer which has got USB port. Most of VAG dashes from 1997 to 2006 are supported. Direct programming of Megamos ID48 (JMA-TP08) chips to VAG cars on CAN bus from November 2003 to June 2006 Transponder Maker Pro is required for pre-programming of these chips. Note: TP22,23,24,25 transponders are NOT required. 1. Main functions: Read ecu info Read pin code Change mileage Read eeprom Programmer new key Write eeprom Clear ecu errors Viem memory buffer 2. List of supported VAG cars: Volkswagen Golf 6, Jetta, Polo, EOS with VDO dash 2009 - 2011, note: not all dashes are supported. Golf 5, Caddy, Touran, Jetta, EOS with VDO dash 2003 - June.2006 Golf 4, Bora with VDO or Motometer/Bosch dash: 1997-2003 Beetle with Marelli dash: 1998 - 2005 Passat, Jetta, with VDO, Marelli or Motometer dash: 1997-2004 Polo with VDO or Motometer dash: 1999-2006 (1999-2002 mileage change only) Sharan with VDO dash: 2000-2004(mileage change only) Caddy, Lupo with VDO or Motometer dash 1997 - 2002(mileage change only) Transporter with VDO dash 1998 - 2000 LT35 ( Temic immo box) 1999-2003 (pin code read only) Gol ( Kostal immo box) 1999-2003 (pin code read only) Seat Altea, Leon, Toledo with VDO 2003 - 6/2006 Leon, Toledo, Cordoba, Ibiza with VDO or Motometer dash 1997-2003 Alhambrawith VDO 2000 - 2004(mileage change only) Inca with VDO or Motometer 1997 -2000(mileage change only) Skoda Octavia II with VDO dash 2005 - 6/2006 Octavia, Fabia with VDO dash 1997 - 2004 Audi A3 VDO dash 2003 - 2005 A3,A4,A6 VDO dash 1997 - 2000 A3,TT,A6 Magnetti Marelli dash 1998 - 2003 A4 Bosch dash 2000 - 2005 A4,A6,A8 1995-1999 (immo box - read pin code) 3. How to programmer keys with vagtacho usb 4.0 Switch ON ignition with any key new or old, no mater which one. Start software, select 'VDO NEW - CAN bus' from menu. Press 'Connect Selected ECU' button, after 5 seconds the data of the dash will be shown on screen. Press 'Program New Key' software will read data from the dash and after few seconds a new window will be open. Package Included: 1 X Vag Tacho 5.0 Interface
Price: 34.99

© 2018.